Fastech Ezi-SERVO ST

www.fastech-motions.com - 17
11. Notes on Installation
1) Ezi-SERVO ST is designed for indoor use only.
2) The ambient temperature of the room should be 0℃~50℃.
3) If the temperature of the product case is higher than 50℃, radiate heat of the outside to
cool down.
4) Do not install Ezi-SERVO ST under direct rays, near magnetic or radioactive objects.
5) If you set more than 2 drives, you must set over 20mm vertically and over 50mm horizontally
as shown below.
More than
20mm
More than
20mm
More than 50mm
More than 50mm
86mm
Model name Length(L)
EzM-86M 78
EzM-86L 117
EzM-86XL 155
L±1
L+28±1
Ø73
-0.05
0
Ø14 -0.013
0
0
2-13 -0.1
37±1
2-25±0.3
1.6±0.2
10±0.5
□
86±0.5
4-69.5±0.2
85.5
100
4-Ø6.5 0 THRU
+0.3
A0.05
0.076 A
Ø 0.076 A
10. Dimensions of Motor [mm]