FATEK FBS-8EY Series User Manual

【Hardware】
Contents
Chapter 1：Introduction of FATEK FBS Series PLC
1.1 Appearance of Main Unit...............................................................................................................H1-1
1.2 Appearance of Expander/Module.................................................................................................H1-2
1.3 Appearance of Communication Expansion Module ....................................................................H1-4
1.4 List of FBS-PLC Models ................................................................................................................H1-5
1.5 Specifications of Main Unit ............................................................................................................H1-7
1.6 Environmental Specifications ........................................................................................................H1-8
1.7 Connection Diagrams of Various Models.....................................................................................H1-9
1.7.1 NC Control Main Unit..............................................................................................................H1-9
1.7.2 Basic/Advanced Main Unit .....................................................................................................H1-10
1.7.3 Digital I/O Expander................................................................................................................H1-12
1.7.4 Digital I/O Expansion Module.................................................................................................H1-13
1.7.5 High-Density Digital I/O Expansion Module ..........................................................................H1-14
1.7.6 Numeric I/O Expansion Module.............................................................................................H1-14
1.7.7 Analog I/O Expansion Module ...............................................................................................H1-14
1.7.8 Temperature Input Module.....................................................................................................H1-15
1.7.9 Expansion Power....................................................................................................................H1-15
1.7.10 Communication Module (CM)..............................................................................................H1-16
1.7.11 Communication Board (CB).................................................................................................H1-17
1.8 Drawings with External Dimensions .............................................................................................H1-18
Chapter 2：System Architecture
2.1 Single-Unit System of FBS-PLC...................................................................................................H2-1
2.2 Formation of Multiple Units............................................................................................................H2-2
2.2.1 Connection of multiple FBS-PLC...........................................................................................H2-2
2.2.2 Connection of FBS-PLC with host computer or intelligent peripherals................................H2-3
Chapter 3：Expansion of FBS-PLC
3.1 I/O Expansion.................................................................................................................................H3-1

FATEK FBS-8EY Series Specifications

General

Brand	FATEK
Model	FBS-8EY Series
Category	Controller
Language	English

Summary

Chapter 1: Introduction of FATEK FBS Series PLC

List of FBS PLC Models

Provides a comprehensive list of FBS PLC models with their specifications.

Specifications of Main Unit

Details the technical specifications of the main unit, including memory and I/O.

Connection Diagrams of Various Models

Illustrates connection diagrams for different FBS-PLC main unit models.

Chapter 2: System Architecture

Single-Unit System of FBS-PLC

Explains the concept of a single-unit PLC system with its components.

Chapter 3: Expansion of FBS-PLC

I/O Expansion

Details how to expand Digital I/O and Numeric I/O points using expansion units.

Chapter 4: Installation Guide

Precautions of PLC Installation

Provides essential safety precautions and guidelines for PLC installation.

Precautions on Construction and Wiring

Details important precautions for wiring and construction to ensure safety and reliability.

Chapter 5: Power Supply Wiring, Power Consumption Calculation, and Power Sequence Requirement

Specifications of AC Power Sourced Power Supply and Wiring

Lists specifications and wiring details for AC power supplies.

Specifications of DC Power Sourced Power Supply and Wiring

Lists specifications and wiring details for DC power supplies.

Residual Capacity of Main/Expansion Unit & Current Consumption of Expansion Module

Details power supply capacities and module current consumption for system design.

Chapter 6: Digital Input (DI) Circuit

Specifications of Digital Input (DI) Circuit

Provides detailed specifications for digital input circuits.

Chapter 7: Digital Output (DO) Circuits

Specifications of Digital Output Circuit

Provides detailed specifications for digital output circuits.

Output Device Protection and Noise Suppression in DO Circuit

Discusses protection methods for output devices and noise suppression.

Chapter 8: Test Run, Monitoring and Maintenance

Inspection after Wiring and Before First Time Power on

Details crucial checks before powering on the PLC for the first time.

Test Run and Monitoring

Explains how to perform test runs and monitor PLC operations.

LED Indications on PLC Main Unit and Troubleshooting

Guides on interpreting LED indicators for troubleshooting PLC issues.

Chapter 1 PLC Ladder Diagram and the Coding Rules of Mnemonic

The Operation Principle of Ladder Diagram

Explains the fundamental principles and elements of ladder diagrams.

Chapter 2 FBS-PLC Memory Allocation

FBS-PLC Memory Allocation

Digital and Register Allocations

Chapter 3 FBS-PLC Instruction Lists

Sequential Instructions

Function Instructions

Chapter 4 Sequential Instructions

Valid Operand of Sequential Instructions

Specifies the valid operands and their ranges for sequential instructions.

Chapter 5 Descriptions of Function Instructions

The Format of Function Instructions

Numbering System

Chapter 6 Basic Function Instruction

T (Timer)

Describes the Timer instruction (T) for timing control.

C (Counter)

Describes the Counter instruction (C) for counting operations.

SET and RESET Instructions

Up/Down Counter and Data Movement Instructions

Arithmetic and Logical Operations

Covers basic arithmetic and logical operations like ADD, SUB, AND, OR.

Chapter 7 Advanced Function Instructions

Flow Control Instructions

Arithmetical and Logical Operations

Details advanced arithmetic and logical operations, including 48-bit division.

Data Movement and Manipulation

Timer and Counter Instructions

Describes cumulative timers and up/down counters for timing and counting tasks.

Watchdog and High-Speed I/O

Pulse Output and PID Control

NC Positioning Instructions

Floating Point Operations

Covers arithmetic and trigonometric operations for floating-point numbers.

Chapter 8 Step Instruction Description

The Operation Principle of Step Ladder Diagram

Introduction of Step Instructions: STP, FROM, TO and STPEND

Introduces fundamental step instructions for controlling sequence flow.

Syntax Check Error Codes for Step Instruction