Disclaimers
M-Series PLC Motion User Manual
Disclaimers
The dimensions and the weight specified in the manual are nominal values only. Even if provided with
the tolerance, they cannot be used in the manufacturing purposes.
The data specified in this Manual mean that the performance data obtained under FATEK’s test
conditions are provided for the user to confirm its compliance only. Therefore, the user is also required
to consider the actual application conditions. Therefore, actual performance shall be defined according
to the content of the guarantee and the limit of responsibilities established by FATEK.
The content of this Manual is provided through careful checking process and is considered as correct.
However, FATEK shall not be liable for the errors or the negligence that may be found in the text, printing
content and proofreading.
The product specifications and accessories may be subject to change along with the technical
improvement or other reasons. In the event that the published specifications or performance need to
be changed or where significant structural change is required, FATEK will change the model number of
the product accordingly. If certain specifications of the product have changed, then FATEK will not give
the notice under the following situation: when it is required to use a special model number or create
particular specifications in order to support the customer’s application according to the instructions
given by the customer. To confirm actual specifications of the product to be purchased, please contact
the local FATEK distributor.
To Next Page
Loading...
Need help?
General
