15
FAVERO Electronics - 0259-0902A Assioma user manual _Rev21 - EN-IT-DE
ENGLISH
The force necessary to engage and release the shoe from the pedal is not the one
wanted
• Adjust the tension of the springs using the adjusting screw (Chap. 8.3).
For more information, read the FAQs on the website: cycling.favero.com.
22. Copyright
Copyright 2017. All rights reserved.
It is forbidden to reproduce this manual in full or in part unless explicit written
consent is obtained from Favero Electronics.
The manufacturer reserves the right to improve or modify the product and this manual
without any obligation of prior notice to private users or organizations. Assioma® is a
registered trademark of Favero Electronics. LOOK and Kéo trademarks belong to LOOK
Cycle International. All other trademarks and registered trademarks are the property
of their corresponding owners.
23. Warranty
All the information related to the product warranty are contained in the “Warranty”
leaet supplied with Assioma or which can also be downloaded from the
cycling.favero.com website.
24. Technical features
Product code: Assioma UNO (art. 772-01),
power sensor installed only on the left pedal
Assioma DUO (art. 772-02),
power sensor installed on both pedals
Radio protocol: ANT+ PWR (CT + PO) prole, Bluetooth v4.0
2.4GHz ISM band, RF power max 4dBm, GFSK modulation
Transmitted data: power (watt), cadence (rpm),
L/R balance % (only for Assioma DUO),
torque effectiveness (TE), pedal smoothness (PS), IAV Power
Phase, IAV Rider Position
Minimum and maximum power: 0 - 3000 W
To Next Page
Loading...
Need help?
General