21
tightened with the required tightening torque of 30-
40Nm.
Before every ride, make sure that both end cap and screw
cap are tightened with a tightening torque of 4-6Nm and
5-7Nm respectively. See Ch.23 .
2. Cleaning
Clean Assioma PRO MX with a damp cloth.
Do not use aggressive chemicals such as: gasoline, gas oil
and petrol by-products in general, alcohol, industrial or all-
purpose degreasers, etc.
Do not use high pressure jets.
3. Greasing
Lube occasionally the spindle with a coat of grease to
enhance performance over time.
Make sure you use the greasing tools kit provided within
the box.
All the information necessary for carrying out this process
is available in the specic guide at the following link :
https://cycling.favero.com/assiomapromx/manuals
Fig. 19
To Next Page
Loading...