Need help?Do you have a question about the Favero ASSIOMA PRO MX and is the answer not in the manual?
General| Brand | Favero |
|---|---|
| Model | ASSIOMA PRO MX |
| Category | Bicycle Accessories |
| Language | English |
Details the different Assioma PRO MX models available, including their article numbers.
Lists all items included in the product packaging for each model.
Explains how to identify the left pedal by its markings and spindle groove.
Explains how to identify the right pedal by its markings and spindle groove.
Instructs on applying grease to the spindle thread for easier future removal.
Details how to check for proper clearance between the pedal and bike frame/chain.
Guides on manually screwing the pedal spindle into the crank arm.
Advises on setting the chain to specific sprockets for clearance checks.
Explains how to check for pedal interference with the bike chain and frame.
Describes using washers to adjust clearance if needed.
Specifies the correct torque for tightening the pedal spindle and the tool to use.
Advises on regularly checking the condition and tightness of the cleats.
Clarifies the correct way to unclip the shoe from the pedal.
Emphasizes cleaning golden contacts before charging for optimal function.
Describes the data transmitted and pairing steps using the ANT+ protocol.
Describes the data transmitted and pairing steps using Bluetooth.
Provides general steps for pairing via both ANT+ and Bluetooth.
Outlines the steps for manual calibration using the Favero Assioma app.
Provides generic steps for manual calibration using a bike computer.
Guides on how to connect the pedals to a charger and the charging time.
Advises on the optimal temperature range for battery charging.
Recommends periodic checks of spindle tightness and end cap security.
Provides instructions on how to clean the pedals safely.
Advises on occasional greasing of the spindle for performance.
To Next Page