Specifications
General Specifications:
- complete electronic drum kit with mesh-heads
- standard drum set up
- compact and easy to control drum module
- mesh-head technology for accurate response
- practical, compact and easily assembled drum frame
- all hardware is easy to adjust for optimum playing comfort
Set Up:
- drum frame
- hi-hat-pad + hi-hat foot controller
- kick trigger pedal
- 2 toms + floor tom mesh-head
- crash + ride cymbal-pads
- drum module
Drum Module Ports:
- headphone output 6.35mm TRS jack
- Mono or Stereo master output via 6.35mm TS jack (1 or 2)
- AUX in via 3.5mm TRS mini-jack
- power input for included power supply
- USB MIDI port for bi-directional communication via USB-B
- trigger-inputs for extra crash cymbal-pad and extra tom via 6.35 mm TS jack (not included)
Technical Specifications:
- 15 preset kits
- 10 user kits
- 329 built-in sounds
- 10 built-in songs
- standard trigger inputs: kick trigger, snare, tom1, tom2, tom3, hi-hat, crash, ride, hi-hat controller
- extra trigger inputs: crash2, TOM4
- LCD display: 128 x 64 dot graphic display (backlit LCD)
- mains voltage: 100-240V AC, 50/60 Hz
- power: 12V DC, 1A via power supply (included)
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 07-05-2020 RV Revision date + author initials:
To Next Page
Loading...
