Feelworld DH101 - Menu Function Instructions; Picture, Color, Advance, Input, and Audio Settings

7
①. Use the USB-A to USB-C cable to connect the monitor to the power
supply. After the power is turned on, the indicator light turns red，
the indicator lights up green after connected the signal.
②.Press the MENU key to enter the menu bar, use the ＜ or ＞
key to select the menu item, and press the MENU key confirm to enter
the secondary menu.
③. After entering the secondary menu, use the ＜ or ＞ key to select
the adjustment item. Press the MENU key to confirm and enter the
adjustment item, use the
＜ or ＞ key to adjust the parameter value.
After adjustment, press the EXIT key to return to the previous menu,
and then enter the next step of selection and adjustment.
Note: The menu can only be operated when a signal is connected.
6. Menu Function Instructions
Backlight
0～100
Brightness
0～100
Contrast
0
～
100
Sharpness
0～4
Temperature
9300, 7500, 6500, 5800, sRGB, User
Under the User, the Red, Green and Blue of the image can be