First lock the Sunshade Frame ②with the monitor tight ③.
Open the sunshade ①, and match the sticker on the sunshade
inside to the marked part of the sunshade frame ②, smooth and
press 3 sides on the sunshade, and then complete the sunshade
installation ④.
2. Menu Operation Instruction
After the monitor is properly connected to the power supply, the
indicator light is on (red). Press button to turn on the
monitor power. The indicator light turns yellow. After inputting the
HDMI signal, the indicator light turns from yellow to green.
After start up, short press to select to turn the screen
touch function on or off.
(1). Directly touch the screen for menu operation (turn on the
screen touch function)
①．Double-click on the screen to open the main menu (on the left
side of the screen) and click on the corresponding menu to
display the secondary menu. You can enter the corresponding
function option to select or set with the "<" or ">" key of the
option. Exit the menu and press key of the main menu or
click the touch screen.
②．Swipe up from the bottom of the screen to open the shortcut
menu and click on the corresponding menu to open or set the
To Next Page
Loading...
