Fein FMT 250 - Disassembling Armature (Part 3)

FMT 250; FMT 250Q; FMT 250QSL
6. Disassembly
C-SC_CSSM
Version 1.0
2016-11-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Page 16 of 30
Disassembling armature
1. Pull ball bearing (1) off armature.
Tools:
- Drawing-off socket cap
- Chuck cone, 26mm
1