Fein KBM80U - Feed Operation; Automatic Feed; Manual Feed (KBM80 auto); Manual Feed (KBM800)

20
en
Feed.
Automatic feed KBM80auto
(Fig. 13).
➤ Pull the capstan handles outward.
➤ Press the „ “ button.
The drill motor starts. After reaching the set
speed, the drill motor moves in the direction
of the work piece. The end of the drilling pro-
cedure is electronically detected, and the drill
motor moves back to the starting position.
Do not rotate the capstan handle during
automatic feed operation.
Do not use the automatic feed when tapping.
Manual feed KBM80auto
(Fig. 14).
➤ Position the capstan handles in center
position as indicated in Fig. 14.
➤ With the motor running, manually
rotate the capstan handle.
Manual feed KBM80U
(Fig. 15).
➤ Feed without the capstan handle.
Fig. 13
Fig. 14
Fig. 15
3 41 01 126 21 0.book Seite 20 Donnerstag, 21. Januar 2010 1:48 13