FEISHEN K550ATV EEC 4x4

Questions and Answers

C
Chase LarsonAug 16, 2025
Why is the belt burning on my FEISHEN Offroad Vehicle?
- L
  lindseybowenAug 16, 2025
  Belt burning on your FEISHEN Offroad Vehicle can occur due to several reasons. It may be caused by loading the ATV into a pickup or tall trailer when in high range; starting out going up a steep incline; driving at low RPM or low ground speed; insufficient warm-up of ATV’s exposed to low ambient temperatures; slow and easy clutch engagement; towing/pushing at low RPM /low ground speed; getting stuck in mud or snow; or climbing over large objects from a stopped position. To prevent this, shift to low range when loading, starting on inclines, towing, or stuck. Drive at higher speeds or use low range for cooler CVT temperatures. Warm the engine for at least 5 minutes in neutral, and use fast, effective throttle for clutch engagement.
J
jennifer80Aug 19, 2025
What to do if my FEISHEN K550ATV EEC 4x4 battery is weak?
- A
  Austin JohnsonAug 19, 2025
  If your FEISHEN Offroad Vehicle battery is weak, this may be due to starting a faulty engine for a long time or leaving the main switch (key) on while parking. To resolve this, refer to '8. STARTING THE ENGINE' and check the fuel/air/ignition/compression system. Also, remember to turn off the main switch (key) immediately after stopping the engine.
D
Diane RobinsonAug 21, 2025
How to prevent belt burning when climbing obstacles with my FEISHEN K550ATV EEC 4x4 Offroad Vehicle?
- J
  James JosephAug 22, 2025
  To prevent belt burning when climbing over large objects from a stopped position with your FEISHEN Offroad Vehicle, shift the transmission to low range and carefully use fast, aggressive throttle application to engage the clutch. Be aware that excessive throttle may cause loss of control and vehicle overturn.
V
Vicki HortonAug 25, 2025
How to prevent belt burning when stuck in mud with FEISHEN Offroad Vehicle?
- J
  Jason MedinaAug 26, 2025
  To prevent belt burning when your FEISHEN Offroad Vehicle is stuck in mud or snow, shift the transmission to low range and carefully use fast, aggressive throttle application to engage the clutch. Be aware that excessive throttle may cause loss of control and vehicle overturn.
R
Robert GreeneAug 27, 2025
How to stop belt burning when loading FEISHEN K550ATV EEC 4x4?
- B
  Billy OconnellAug 27, 2025
  To prevent belt burning when loading your FEISHEN Offroad Vehicle into a pickup or tall trailer, shift the transmission to low range during loading.
A
Andrea FrazierAug 31, 2025
How to prevent belt burning when starting on an incline with FEISHEN K550ATV EEC 4x4?
- V
  Valerie BrownAug 31, 2025
  When starting out on an incline with your FEISHEN Offroad Vehicle, use low range. Alternatively, dismount the ATV after first applying the park brake and perform the 'K' turn as described in this manual.
D
David BakerSep 3, 2025
How to prevent belt burning when towing with FEISHEN Offroad Vehicle?
- M
  Mrs. Teresa AndersonSep 3, 2025
  To prevent belt burning when towing or pushing with your FEISHEN Offroad Vehicle at low RPM or low ground speed, use low range only.
C
Crystal MichaelSep 5, 2025
How to prevent belt burning in cold weather with FEISHEN K550ATV EEC 4x4 Offroad Vehicle?
- M
  Michael ShafferSep 6, 2025
  To prevent belt burning in cold weather with your FEISHEN Offroad Vehicle due to insufficient warm-up, warm the engine for at least 5 minutes with the transmission in neutral. Advance the throttle to approximately 1/8 throttle in short bursts, 5 to 7 times. This will make the belt more flexible.
M
mrossSep 8, 2025
Why does belt burning happen when driving at low speed with my FEISHEN Offroad Vehicle?
- R
  Ryan JonesSep 8, 2025
  Belt burning can occur on your FEISHEN Offroad Vehicle when driving at low RPM or low ground speed (approximately 3-7 MPH/5-12 km/h). To avoid this, drive at a higher speed or use low range. Using low range is highly recommended for cooler CVT operating temperatures and longer component life.
T
timothysolisSep 12, 2025
How to properly engage the clutch on my FEISHEN K550ATV EEC 4x4 Offroad Vehicle to prevent belt burning?
- C
  charles02Sep 12, 2025
  To prevent belt burning on your FEISHEN Offroad Vehicle, ensure fast, effective use of the throttle for efficient clutch engagement, rather than slow and easy clutch engagement.