Rear Spring Adjustment
The rear shock absorber spring is adjusted by rotating the adjuster (1) either
clockwise or counterclockwise to increase or decrease spring tension.
Air Filter Service
1. Remove seat.
2. Release clips and remove
cover.
3. Loosen clamp and remove filter.
4. Remove fabric type pre-filter from
main filter. Wash pre-filter in
soapy water and dry it.
5. Reinstall pre-filter over main filter. Replace main filter as required.
6. Reinstall filter into air box and tighten clamp. Do not over tighten clamp or filter
damage may occur.
To Next Page
Loading...