Cleaning Your ATV
Keeping your ATV clean will extend the life of various components.
Washing
Never use a high pressure type car wash system, it can damage the wheel bearings,
transmission seals, body panels, brakes and warning labels, and water might enter the
engine or exhaust system.
The best and safest way to clean your ATV is with a garden hose and a pail of mild
soap and water. Use a professional type washing mitten, cleaning the upper body first
and lower parts last. Rinse with water frequently and dry with a chamois to prevent
water spots.
NOTE: If warning labels are damaged, contact your dealer for replacement.
Waxing
Your ATV can be waxed with any non-abrasive automotive paste wax. Avoid the use
of harsh cleaners since they can scratch the body finish.
CAUTION
Certain products, including insect repellants and chemicals, will damage plastic
surfaces. Care must be taken when using these products.
Storage Tips
CAUTION
Do not start the engine during the storage period. This will disturb the protective film
created by fogging.
To Next Page
Loading...