Setting the Parking Brake
1. Squeeze and release the brake lever two or three times and hold it.
2. Push the park brake lock forward to engage the lock. Release the brake lever.
3. To release the parking brake lock, squeeze the brake lever. It will return its
unlocked position.
Important Safeguards
·The parking brake may relax when left on for a long period of time. This could
cause an accident.
·Do not leave the vehicle on a hill depending on the parking brake for more than
five minutes.
·Always block the downhill side of the wheels if leaving the ATV on a hill or park
the ATV in a side hill position.
WARNING
Always check to be sure that the parking brake has been disengaged before operating
the ATV. An accident could result causing severe injury if the parking brake is left on
while the ATV is operated.
To Next Page
Loading...