GENERAL INFORMATION
1.1 Product Introduction
R301 reader is a kind of high-speed contact smart card reader, which is used for PC environment or relevant
smart card environment. It is compliant with standard CCID specification and USB 2.0 interface (also the
USB 1.1 interface). The R301 reader can operate all CLASS A, CLASS B and CLASS C smart cards which
are compliant with ISO 7816-1/2/3. The standard size IC card which is compliant with ISO 7816-3 can be
supported stably as well. As the mandatory processing device of smart card integrated systems, R301 reader
can greatly increase the security of the whole application. It can be widely used in financial, social security,
telecom, online banking, e-business, authentication, e-government and other CPU based high level security
card application fields.
1.2 Acronyms and Abbreviations
USB – Universal Serial Bus
CCID – (Chip Card Interface Device) Integrated Circuit(s) Card Interface Devices Specification
PCSC – (Short for "Personal Computer/Smart Card") is a specification for smart-card integration
into computing environments.
1.3 Keywords and Features
Keywords: Smart Card Reader, CCID, USB, ISO 7816, T0, T1, Full speed USB device, R301
Features:
1. Support USB 2.0 interface
2. Compiled standard CCID specification
3. Read/Write all CLASS A, CLASS B and CLASS C smart cards which are compliant with ISO 7816-
1/2/3 standard, T=0 and T=1 protocol
4. For contact card, support full parameter PPS protocol. The ICC data transfer Baud rate is 625K (The
result is got when the frequency of IC card is 5MHz-12MHz)
5. Short circuit protection
6. Be compliance with ISO7816, IEC/EN60950, EMV 2000 Level
7. Power supply: 1.8V/3V/5V (independent control)，LDO provides stable 1.8V/3V power
8. Data transfer speed: For T=0 and T=1, Baud rate is 13.440k ~ 625K (The result is got when the
frequency of IC card is 5MHz-12MHz) (D=32/F=372)
To Next Page
Loading...