www.feiyu-tech.com 10
3.7 Gimbal Initialization
You can initialize your gimbal when:
a. When camera is not balance.
b. If not use for a long period of time.
c. In case of extreme temperature variations.
Steps: (1) Five tap function button, the motors will stop working after the tone.
Status indicator turns solid blue.
(2) Place the gimbal on a at, horizontal surface. The gimbal will automatically
reset a few seconds later, after detecting no movement. The blue light will ash
three times to indicate end of the reset process.
(3) After the initialization is successful, tap the function button to wake up.
Note: if the initialization is not successful, tap the function button to
wake up. Restart initialization process.
To Next Page
Loading...
