Adjusting steps:
Five batter function button,
the motor is turned off.
Still placed on the
desktop, gimbal is
automatically
initialized.
After the initialization
is successful, the motor
will turn on automatically.
The gimbal is automatically
reset after the end.
Note: If the initialization is not successful for a long time, long press
the function button to turn off the gimbal,restart it and then initialize.
2
3
1
10
Gimbal initialization
You can initialize your gimbal:
（1） when camera is not level
（2） if not used for a long period of time
（3） in case of extreme temperature variations
To Next Page
Loading...
