FEIYUTECH VLOG pocket2 - Getting Started; Unlock and Lock Clamp; Folding and Unfolding

3
3.Start to Use
TIPS
(1) Unlock the three-axis clamp before powering on the gimbal.
(2) Please fully charge the battery before powering on the gimbal for the 󽗉rst time.
(3) Landscape to mount smartphone.
(4) If the power is too low, the red light will 󽗊ash three times every 󽗉ve seconds that
indicating you should charge it immediately.
(5) When not in use, power o󽗈 the gimbal.
3.1Unlock / Lock the clamp
Take the pan axis clamp for example.
Lock
Unlock
3.2. Fold and unfold
Unfold
(1) Loosen the folding knob and tighten the knob after unfolding the vertical arm.
(2) Unlock the three-axis clamp.
Fold
(1) Lock the three-axis clamp.
(2) Loosen the folding knob, and then tighten the knob after folding the vertical arm.