13
G 220
880
1260
1800
!
Edgebander with glue pot
G 200 / G 220
Edge thickness 0,4 – 2 mm
Workpiece feed speed 5,5 m/min | 7,0 m/min (Valid from 2020)
Speed Spindle moulder unit 9000 min-1
Ø-WIDIA moulder 70 mm
Heating power Gluepot 1135 W
Working temperature (min./max.) 20/210° C
Ø-Extraction connection 120 mm
Workpiece dimensions
Length (min.) 250 mm
Width (min.)* 90 mm
Workpiece thickness (min./max.) 10 – 45 mm
Attention! Risk of material damage!
When processing very narrow workpieces, the workpiece may tilt slightly. This means that the workpiece will
not be processed evenly.
*) The minimal workpiece width varies depending on the workpiece length, height and type of surface.
Total height 1310 mm
Transport width min. 650 mm
Weight net 310 kg
Working table dimensions 1800 x 300 mm
Extensible support 320 mm
Machine including packaging
Length 2100 mm
Width 990 mm
Height 1400 mm
Operating/room temperature +18 max. +40 °C
Storage temperature –10 max. +50 °C
Electrical equipment
Power rating 4 kW
Motor (electric data) 3 x 380-440V/ 50-60 Hz
3 x 220-240V/ 50-60 Hz
1 x 220-240V/ 50-60 Hz
Technical data
4 Specifications
4.1 Dimensions and weight
4.2 Operation and storage conditions
Fig. 1: Machine description
4.3 Drive motor
To Next Page
