Felt Compulsion Series - Rear Shifter Routing

1312
ORDER 1, 2, 3
REAR SHIFTER ROUTING
2
1
1
3
You can remove the right
dropout pivot axle to get better
access to the shift housing port
in the chainstay
REAR BRAKE ROUTING
2
3
Cross to right side
of down tube
For traditional (right hand rear) brake
lever setups, use the 2-hole 5mm port
(ccn099yb) on the left side
5mm wedgie
2019 Compulsion Series Supplement Manual_V6_21119.indd 12-13 2/11/19 9:20 AM