To Next PageTo Next Page
Need help?Do you have a question about the Femi XXX and is the answer not in the manual?
Important safety symbols and warnings provided for user guidance.
Technical specifications including length, width, height, and weight.
Machine built according to Community Directives, CE mark guarantees conformity.
Details materials like wood, aluminum, and plastics suitable for cutting.
Lists materials like ferrous metals and foodstuffs that must not be cut.
Instructions for safely removing packaging and retaining it.
Guidance on how to safely handle, move, and transport the mitre-saw.
Advice on setting up the machine in a stable and safe work environment.
Guidelines for connecting the machine to the electrical supply safely.
How to set the cutting angle for left and right mitre cuts.
Instructions for tilting the head for bevel cuts up to 45 degrees.
Guidance on using the bar clamp for precise repetitive cuts.
How to adjust the upper work surface height for desired cutting widths.
Adjusting the bearing bracket for precise cutting distance.
Ensuring the dividing wedge is correctly positioned relative to the blade.
How to operate the machine for cutting on the lower work surface.
Instructions for using the machine as a circular saw on the upper surface.
Step-by-step guide for installing or replacing the cutting blade.
Tables detailing the cutting capabilities at different angles.
How to use the supplementary support base for increased workpiece stability.
Guide to choosing the appropriate blade for different materials.
Instructions for fitting and adjusting the vertical clamp.
Information on connecting dust extraction systems for cleanliness.
Procedures for routine maintenance tasks to keep the machine in order.
Where to seek professional help for repairs or special maintenance.
Guidelines for disposing of the machine and its packaging responsibly.
General
