EasyManua.ls Logo

Fender 112 - Troubleshooting and Specifications; Troubleshooters Checklist; Amplifier Specifications

Fender 112
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TYPE:
PART NUMBER:
DIMENSIONS:
POWER OUTPUT
INPUT IMPEDANCE:
EFFECTS LOOP:
POWER REQUIREMENT
SPEAKER:
PR291
100V Version: 22-6772
120V Version: 22-6702
230V Version: 22-6762
240V Version: 22-6742
Height: 16-1/2” (41.9 cm)
Width: 20-5/8” (50.5 cm)
Depth: 9” (22.9 cm)
Weight: 33 lbs. ( 14.9 kg
94 Wafts R.M.S. into 4 ohms at 5% T.H.D.
Input 1: 850k
Input 2: 66k
Preamp Output Impedance: 1k
Power Amp Input Impedance: 44k
Power Amp Sensitivity: 1.0V for clipping
100 - 120VAC, 50-60 Hz, 360W max.
230 - 240VAC, 50 Hz, 360W max.
Fender Special Design 12” 4 (P/N 048878)
TROUBLESHOOTER’S CHECKLIST
DELUXE 112 PLUS SPECIFICATIONS:
- Is the power cord properly plugged into an electrical outlet?
- Is there power at the outlet?
- Is the speaker properly connected to the amplifier?
- Are all the control knobs turned above four?
- Is the volume control on the instrument turned up?
- Is your instrument properly plugged into the amplifier?
(Eliminate all effects and try another guitar cord.)
If after checking all of the above, the system is still not
working correctly, consult your Fender Service Dealer.

Related product manuals