Need help?Do you have a question about the Fender Stage 112SE and is the answer not in the manual?
General| Power Output | 100 Watts |
|---|---|
| Speaker Size | 12 inches |
| Effects | Reverb |
| Type | Solid State |
| Speaker | 1 x 12" Fender Special Design Speaker |
| Channels | 2 |
| EQ | 3-band EQ |
| Inputs | 2 x 1/4" |
| Outputs | 1 x Line Out |
| Footswitch | Yes |
Describes the Fender Stage I 12SE as a solid-state amplifier combining new distortion sounds with classic Fender tones.
Details the controls for the NORMAL Channel (VOLUME, TREBLE, MID, MID SHIFT, BASS) and DRIVE Channel (GAIN, CONTOUR, TREBLE, BASS).
Explains the detachable footswitch, PREAMP OUT/POWER AMP IN jacks, and the radical underdamped power amp design.
Provides warnings to reduce the risk of fire or shock hazard and advises against user servicing.
Details Input 1 (high impedance, high sensitivity) and Input 2 (lower impedance, sensitivity) for instrument connections.
Describes the VOLUME, TREBLE, MID, MID SHIFT, and BASS controls for the Normal channel.
Explains the GAIN, CONTOUR, and TREBLE controls for the Drive channel.
Details the DRIVE SELECT button, DRIVE channel VOLUME, and the REVERB control affecting both channels.
Describes the FOOTSWITCH, PREAMP OUT, POWER AMP IN, LINE OUT, and POWER SWITCH functions.
Details the connection for external speakers, specifying an 8 ohm minimum.
Explains the grounding type supply cord and warns against altering the AC plug.
Provides instructions for cleaning the amplifier's vinyl covering with a light, soapy solution.
Offers a list of checks for common operational issues before consulting a service dealer.
Lists key technical data including Type, Part Number, Dimensions, Weight, Power Output, Impedance, and Power Requirements.
Illustrates the internal signal path from inputs through tone controls, gain, reverb, and to the power amp and speaker.
To Next Page