To Next PageTo Next Page
Need help?Do you have a question about the Fender Deluxe 112 Plus and is the answer not in the manual?
Confidential information disclosure and part substitution policy for service, emphasizing reliability and safety.
Details product release, part numbers, power requirements, and input/output specifications.
Provides physical dimensions (height, width, depth) and weight of the amplifier.
Explains input sensitivity, switching, pre-amp stages, and signal routing to clean/overdrive channels.
Describes the AC voltage control and comparator logic for channel switching using footswitch input.
Details the high-voltage op-amp, protection diodes, bootstrap capacitors, and bias circuit for output transistors.
Lists components, part numbers, and reference designations for the PCB.
Details components and part numbers for the chassis and its associated hardware.
Lists components and part numbers specifically for the footswitch assembly.
Lists components and part numbers for the amplifier's cabinet and its fittings.
Encompasses remaining parts not categorized under specific assemblies, including manuals.
Provides the main circuit diagram detailing the electronic layout and component interconnections.
General| Channels | 2 (Clean and Drive) |
|---|---|
| Effects | Reverb |
| Speaker | 12" Fender Special Design |
| EQ | 3-Band EQ |
| Controls | Gain, Volume, Treble, Mid, Bass, Reverb |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1 x 1/4" (Line Out) |
| Footswitch | Optional (for channel switching) |
