Distortion Bypass Footswitch & LED
Footswitch bypasses distortion effect. LED Illuminates when distortion
effect is active.
Level (Distortion)
Controls overall distortion output level.
Tone
Similar to tone control on a guitar — turn counterclockwise to decrease
treble frequencies; turn clockwise for full-range tone.
Gain
Controls amount of distortion added to signal.
Bass Boost
Boosts low-end frequencies.
Compressor Bypass Footswitch & LED
Footswitch bypasses compressor effect. LED Illuminates when
compressor effect is active.
Recovery
Controls compressor recovery time.
Compression
Controls amount of compression (compression ratio).
Level (Compressor)
Controls overall compressor output level.
G.R. (Gain Reduction) LED
Illuminates when gain is actively being reduced.
To Next Page
Loading...
