wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
8
Presets
Players’ Lounge Bank
The Players’ Lounge (rewritable) presets are outfitted from the factory with a
variety of amplifier and effects combinations but they are rewritable for your
own preset designs. Press the BANK repeatedly until the green LED lights up,
then press a preset button (A–G) to activate a Players’ Lounge preset.
NOTE: The table (below) will not be valid for presets that you have customized.
RESET: To reset the Players’ Lounge bank to factory presets, hold down the
A and G preset buttons while turning the Cyber–Champ™ amplifier on.
Resetting will erase any custom
presets you have created.
Preset Name Amp Type Reverb Modulation Delay
A Stadium Higher-Gain British Combo with Post- Arena, bright frequency None 300ms Tape Delay, low feedback
Rock Distortion tone tone controls response with long decay with medium wow & flutter
B Morning Clean Blackface™, with vintage Pre- Room, bright frequency Vibratone, fast rate None
Light Distortion Fender® Blackface™ tone controls response with medium decay with medium depth
C Psychobilly High-Gain Tweed with ‘59 Bassman® Room, dark frequency None 130ms Tape Delay, low feedback
Pre-Distortion tone controls response with medium decay with medium wow & flutter
D Nü-D Maximum-Gain, Modern Heavy Metal Room, dark frequency Chorus, slow sweep 100ms Tape Delay, low feedback
Combo with Post-Distortion tone controls response with medium decay rate with high depth with medium wow & flutter
E Clean Crunch Blackface™, with vintage Pre- Arena, bright frequency None None
Arena Distortion Fender® Blackface™ tone controls response with long decay
F Jazz Clean Dyna–Touch™ with Hall, bright frequency None None
Box Pre-Distortion tone controls response with medium decay
G Barracuda Maximum-Gain, Dyna–Touch™ Room, dark frequency Phaser, medium sweep 350 ms Ducking Delay,
Pre-Distortion tone controls response with medium decay rate with medium depth medium feedback, high ducking
Preset Editing
You can create 7 of your own presets and save them in the Players’ Lounge
bank. First select any preset with the desired Amp Type as the foundation for
your new preset — see the tables on pages 7 and 8. Then adjust the amplifier
settings any way you like. When satisfied, press and hold any preset button
for 2 seconds. Your new preset is saved in the Players’ Lounge bank
(assigned to the button held) and it is automatically activated.
NOTE: The previous contents of the Players’ Lounge preset you are saving to
will be overwritten with your new preset.
Effect Editing—Advanced
Using a computer you can edit effect parameters that are inaccessible through
the Cyber–Champ™ front panel controls. Your modified effect can then be
saved to a Players’ Lounge preset and used in the modified form using the front
panel controls (See Advanced Effect Editing on page 10).
A computer with a MIDI capable
soundcard, appropriate adapters and
a MIDI utility application are required for
advanced effect editing.
You can use a Players’ Lounge preset
as the starting point for a new preset,
but the descriptions in the table above
will no longer be valid for presets you
have customized.
To Next Page
Loading...
