Jewel Indicator
The Jewel Indicator shows when the distortion effect is active
Bypass Footswitch
This rugged footswitch bypasses the effect.
Boost Footswitch
This switch provides extra output level set by the Boost control.
Input Jack
This is a high-impedance input suitable for electric guitar, bass,
keyboards and other instruments.
Output Jack
This is a low-impedance output jack that connects to the amp or to
the next effect pedal in the signal chain.
DC Power Connector
This is a standard center-negative 9VDC jack for use with
appropriate power supplies.
LED Kill Switch
This switch extinguishes the LEDs that illuminate the control
knobs—useful in maximizing battery life when running the pedal from
batteries.
Low Battery Indicator
This red LED on the front of the battery door illuminates when battery
voltage drops below a set threshold, indicating that the battery
should be replaced soon.
To Next Page
Loading...
