Bypass footswitch
Bypasses effect.
Jewel indicator
Illuminates when effect is active.
Level
Controls overall distortion output level.
Boost Level
Controls output volume.
Boost LED
Illuminates when boost is engaged.
Boost
Controls amount of saturation added to signal.
Gain
Controls amount of distortion added to signal.
Tone
Similar to tone control on a guitar — turn counterclockwise to decrease
treble frequencies; turn clockwise for full-range tone.
Treble
Controls high-frequency boost/cut.
Bass
Controls low-frequency boost/cut.
Tight
Helps control low-end tonal characteristics that can make higher-gain
settings sound muddy or unclear.
To Next Page
Loading...
