Bypass Footswitch/LED
Bypasses effect.
Output Jack
Low-impedance output jack connects to amp or to next effect pedal in
signal chain.
Level
Controls overall output level.
Speed
Controls overall tremolo rate (0.1 Hz -10 Hz).
To select various rhythmic subdivisions, press and hold Tap Footswitch
while turning Speed control knob. See Tap Footswitch for more details.
Intensity
Controls how much tremolo effect is present.
Wave
Once a tremolo mode is selected using the Mode Switch (below), use
this control to smoothly blend between different waveforms of each
mode rather than having to choose only one.
Mode Switch
Select one of three tremolo modes—triangle/sine/square,
ramp/triangle/sawtooth, and adjustable square wave.
To Next Page
Loading...
