EasyManua.ls Logo

Fender Passport P80 - Product Specifications; Power Output and Input Impedance

Fender Passport P80
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Part Numbers
0691003000 (120V, 60Hz) USA,
0691003030 (240V, 50Hz) AUS,
0691003040 (230V, 50Hz) UK,
0691003060 (230V, 50Hz) EUR,
0691003070 (100V, 50Hz) JPN
Frequency Response
20 Hz to 40 kHz ± 1 dB (at send output)
30 Hz to 30 kHz ± 1 dB (at speaker output,
with processor threshold exceeded)
Distortion
< 0.1%, 20 Hz to 20 kHz, 1 dB below rated output
System Signal to Noise Ratio
> 80 dB @ 1 w, “A” WTD
Power Output
80W continuous average power, 4ohm,
both channels driven with THD < 1 %
Input Impedance (Channels 1-2-3 XLR and 1/4”)
“Mic” switch position: 2 k ohm
“Line” switch position: 66 k ohm
Input Impedance (Phono Channel 1/4”)
78 k ohm
Max. Input Level
Mic: -7 dBu
Line: 30 dBu
Stereo: 26 dBu
Return Input Impedance
47k ohm
Fuse type
T4AH, 250V
Passport System
Width: 610 mm (24 in.)
Height: 541 mm (18 in.)
Depth: 254 mm (10 in.)
Weight: 11.83 kgs (26 lbs)
Speakers
Width: 245 mm (9.65 in.)
Height: 439 mm (17.5 in.)
Depth: 241 mm (9.5 in.)
Weight: 3.3 kgs (7.25 lbs)
Power Tower
Width 254 mm (10 in.)
Height 451 mm (18 in.)
Depth 178 mm (7 in.)
Weight 5.23 kgs (11.5 lbs)
Tower Footprint
241 x 298 mm (9.5 x 11.75 in.)
Microphone
Dynamic Cardioid, balanced
Microphone Cable
XL -Male to XL-Female, 6 m (20 feet)
Speaker Cables
1/4 in. to 1/4 in., 9 m (30 feet)
0 dBu is referenced to 0.775 volts rms
SPECIFICATIONS
PASSPORT HAND HELD WIRELESS SYSTEM –
Custom designed wireless system for use with
Passport sound systems. Once installed, this system
becomes a permanent part of your sound system.
Includes a hand held electret condenser microphone
and receiver module.
Part Number - 069-1201-00x (x indicates frequency)
PASSPORT EXECUTIVE WIRELESS SYSTEM –
Custom designed wireless system for use with
Passport sound systems. Once installed, this system
becomes a permanent part of your sound system.
Includes a receiver module, and a belt pack
transmitter with interchangeable headset, lavalier and
instrument cable elements. Custom molded carry
case included.
Part Number - 069-1205-00x (x indicates frequency
FENDER DYNAMIC CARDIOID MICROPHONE - High
quality, dynamic cardioid hand held microphone.
Includes mic clip.
Part Number - 069-9012-000
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CA USA
Passport® and Fender® are registered trademarks
and Power Tower™ is a trademark of FMIC. Other
trademarks are property of their respective owners.
Copyright © 2004 FMIC. All rights reserved.
P/N 063679 REV B
Printed in China

Related product manuals