Need help?Do you have a question about the Fender PASSPORT PD-500 and is the answer not in the manual?
Diagram showing a typical band setup with microphones and instruments.
Adjusts overall volume and tone for the entire system.
Button to automatically detect and eliminate feedback.
Connects power, describes fuse replacement, and voltage selection.
Troubleshooting steps for power LED and protect LED errors.
Steps to troubleshoot when one speaker has no audio output.
Diagram showing a typical band setup with microphones and instruments.
Adjusts overall volume and tone for the entire system.
Button to automatically detect and eliminate feedback.
Connects power, describes fuse replacement, and voltage selection.
Troubleshooting steps for power LED and protect LED errors.
Steps to troubleshoot when one speaker has no audio output.
General| Type | Portable PA System |
|---|---|
| Bluetooth | Yes |
| Frequency Response | 50 Hz - 20 kHz |
| Power Output | 500W |
| Inputs | XLR, 1/4", RCA |
| Outputs | XLR, 1/4" |
| Speakers | 1" Tweeter |
To Next Page
