Need help?Do you have a question about the FENDT Vario 930 and is the answer not in the manual?
General| Max Speed | 60 km/h |
|---|---|
| Fuel Tank Capacity | 660 liters |
| Tire Size - Rear | 650/65 R42 |
| Engine Power | 300 hp |
| Transmission | CVT |
| Hydraulic System | Load Sensing |
| Wheelbase | 3, 050 mm (120 inches) |
| Engine | 6-cylinder |
| Rated engine speed | 2100 rpm |
| Width | 2.75 m |
| Length | 5, 677 mm |
Safety precautions for electrical connections during installation, emphasizing correct polarity and connection order.
Prepare the machine for installation by ensuring a level, clean, and dry environment.
Best practices for installation and operation, including part identification.
Clarifies the assumed viewpoint for following installation instructions.
Information on accessing software and manual updates from the vendor.
Detailed list of all components included in the SmarTrax MD installation kit.
Step-by-step instructions for safely removing the steering wheel.
Procedure for installing the anti-rotation bracket onto the steering column.
Guide for installing the spline and ring gear components onto the steering column.
Instructions for correctly reassembling the steering wheel after component installation.
Steps to install the main mechanical drive unit onto the steering assembly.
Instructions for mounting the SmarTrax MD node in the machine's cab.
Guidelines for selecting an appropriate and safe location for node mounting.
Detailed steps for assembling and mounting the node bracket and the node itself.
Procedure for installing the foot switch in a convenient and accessible location.
Guide for connecting the node harness to the node and other components.
Instructions for installing the chassis cable for systems without existing power.
Steps for connecting the system to an existing CAN system via an interface tee.
To Next Page
