Need help?Do you have a question about the FENDT Vario 924 and is the answer not in the manual?
Details electrical safety precautions for equipment installation and operation.
Prepares the user for the installation process, emphasizing safety and proper setup.
Provides best practices for installing or operating the SmarTrax MD system.
Defines the assumed orientation for manual instructions: standing behind the machine.
Informs users about the availability of software and manual updates online.
Lists all components included in the SmarTrax MD installation kit for verification.
Step-by-step instructions for safely removing the existing steering wheel from the machine.
Guide for attaching the anti-rotation bracket to the steering column assembly.
Details on fitting the spline and ring gear components onto the steering column.
Instructions for reattaching the machine's steering wheel after component installation.
Procedure for mounting the main mechanical drive unit onto the steering column assembly.
Guides the installation of the SmarTrax MD node within the machine's cab.
Details on assembling and mounting the node using brackets for specific tractor models.
Instructions for selecting a location and mounting the foot switch in the machine's cab.
Covers connecting the node harness to the node, foot switch, and operator presence switch.
Procedure for installing a chassis power cable for systems without existing power.
Instructions for integrating SmarTrax MD with the machine's existing CAN system.
To Next Page
General
