Need help?Do you have a question about the FENDT Vario 939 and is the answer not in the manual?
General| Engine Power | 390 hp |
|---|---|
| Transmission | Continuously Variable Transmission (CVT) |
| Max Speed | 60 km/h |
| Transmission Type | Continuously Variable Transmission (CVT) |
| Max Torque | 1650 Nm |
| Hydraulic System | Load-sensing system |
| Operating Weight | 12, 500 kg |
Covers electrical safety precautions during installation and operation of the SmarTrax MD system.
Outlines steps and conditions for preparing the machine before SmarTrax MD installation.
Provides best practices for installing and operating the SmarTrax MD system.
Clarifies the assumed viewing perspective for manual instructions.
Informs users about the availability of software and manual updates.
Lists all components included in the SmarTrax MD installation kit for verification.
Details the procedure for safely removing the tractor's steering wheel.
Guides the installation of the anti-rotation bracket onto the steering column.
Explains how to install the spline adapter and ring gear onto the steering column.
Covers the process of reinstalling the tractor's steering wheel after component installation.
Provides instructions for installing the main mechanical drive unit.
Instructions for installing the SmarTrax MD node, including mounting locations.
Details the assembly and mounting of the node mounting bracket and the node.
Step-by-step guide for installing the SmarTrax MD foot switch.
Covers the connection of the node harness to the node, foot switch, and operator presence switch.
Procedures for installing the chassis power cable for specific system configurations.
Instructions on integrating the SmarTrax MD with the machine's existing CAN system.
To Next Page
