Need help?Do you have a question about the FENDT Vario 936 and is the answer not in the manual?
General| Max Speed | 60 km/h |
|---|---|
| Hydraulic System | Closed-center load sensing |
| Rated engine speed | 2100 rpm |
| Tire Size (Rear) | 650/65 R42 |
| Transmission | CVT |
| Fuel Tank Capacity | 660 liters |
| Engine | MAN |
| Wheelbase | 3, 050 mm (120 inches) |
| Engine Power | 360 hp (268 kW) |
Critical electrical safety precautions for installing the SmarTrax MD system, emphasizing polarity and connection order.
Guidelines for preparing the machine environment before beginning the SmarTrax MD installation process.
Best practices recommended by Raven Industries for installing or operating the SmarTrax MD system.
Defines the standard orientation for instructions, assuming the user is behind the machine facing the cab.
Information on where to find software and manual updates for the SmarTrax MD system.
A comprehensive list of all components included in the SmarTrax MD installation kit for verification.
Detailed instructions for safely removing the tractor's steering wheel to prepare for component installation.
Procedure for correctly installing the anti-rotation bracket onto the steering column assembly.
Steps for fitting the spline adapter and ring gear assemblies onto the steering column.
Guidance on properly reattaching the tractor's steering wheel after installing mechanical drive components.
Instructions for securely installing the main mechanical drive unit onto the steering column assembly.
Steps for installing the SmarTrax MD node, including crucial mounting location considerations and arrow orientation.
Detailed instructions for assembling and mounting the SmarTrax MD node using specific brackets and hardware.
Procedure for locating and securing the foot switch in the tractor cab for operator control.
Guide for connecting the node harness to the SmarTrax MD node and other system components.
Instructions for installing the chassis power cable for systems without existing power integration.
Steps to integrate the SmarTrax MD system with the machine's existing CAN system for power connection.
To Next Page