Need help?Do you have a question about the FENDT Vario 700 Series and is the answer not in the manual?
General| Transmission | Continuously Variable Transmission (CVT) |
|---|---|
| Max Speed | 50 km/h |
| Hydraulic System | Load-sensing hydraulic system |
| Engine | 6-cylinder AGCO Power |
| Tire Options | Various |
Precautions for safe electrical connections during installation and operation.
Guidelines for preparing the machine and workspace before installation begins.
Best practices for system installation and initial operation.
Clarifies the assumed operator orientation for following instructions.
Information on obtaining software and manual updates.
Lists all components included in the SmarTrax MD installation kit.
Step-by-step instructions for safely removing the tractor's steering wheel.
Procedures for installing the bracket to prevent steering column rotation.
Steps to mount the spline adapter and ring gear onto the steering column.
Guide for reattaching the steering wheel after component installation.
Instructions for mounting the mechanical drive unit onto the steering assembly.
Guidance on installing the main SmarTrax MD control node within the tractor cab.
Criteria for selecting an appropriate and safe mounting location for the node.
Detailed steps for physically mounting the node using brackets and hardware.
Instructions for installing the operator-controlled foot switch.
Procedures for connecting the node harness to the SmarTrax MD node and other components.
Steps for installing a chassis power cable for systems without existing power.
Guide for integrating the SmarTrax MD with the machine's existing CAN system.
To Next Page
