Need help?Do you have a question about the FENDT Vario 720 and is the answer not in the manual?
Outlines essential electrical safety precautions for installing and operating the SmarTrax MD system.
Details prerequisites and preparation steps before commencing the SmarTrax MD installation process.
Provides best practices for installing or operating the SmarTrax MD system for the first time or season.
Establishes the standard perspective for interpreting installation instructions within the manual.
Informs users about the availability of software and manual updates on the Raven website.
Lists all components included in the SmarTrax MD installation kit for pre-installation verification.
Step-by-step instructions for safely removing the existing steering wheel from the machine.
Guidance on mounting the anti-rotation bracket securely onto the steering column assembly.
Details the process of fitting the spline adapter and ring gear components to the steering column.
Procedures for reattaching the machine's steering wheel after the new components are installed.
Instructions for installing the main SmarTrax MD mechanical drive unit onto the steering system.
Details the procedure for mounting the SmarTrax MD node within the machine's cab, including orientation requirements.
Provides specific mounting instructions for the SmarTrax MD node for Vario 700 & 800 Series tractors.
Guides on selecting a suitable location and securely installing the foot switch in the tractor cab.
Procedures for connecting the node harness to the SmarTrax MD node and associated system components.
Instructions for installing the chassis power cable for systems without existing power infrastructure.
Steps to connect the SmarTrax MD system to the machine's existing CAN system for power.
General| Rated Engine Speed | 2100 rpm |
|---|---|
| Tire Size - Front | 540/65 R30 |
| Tire Size - Rear | 650/65 R42 |
| Max Speed | 50 km/h |
| Fuel Tank Capacity | 400 liters |
| Hydraulic System | Load-Sensing |
| Engine Type | 6-cylinder |
To Next Page
