Need help?Do you have a question about the FENDT Vario 828 and is the answer not in the manual?
General| Engine Power | 280 hp |
|---|---|
| Max Speed | 60 km/h |
| Rated engine speed | 2100 rpm |
| Tire Size - Front | 540/65 R30 |
| Tire Size - Rear | 650/65 R42 |
| Transmission | CVT |
| Hydraulic System | Load Sensing |
| Engine | 6-cylinder |
Important safety precautions for electrical connections during installation.
Instructions on preparing the machine and environment before starting installation.
Recommended practices for installing or operating the SmarTrax MD system.
Clarifies the assumed perspective for following installation instructions.
Information on where to find software and manual updates for the system.
Lists all components included in the SmarTrax MD installation kit for verification.
Step-by-step guide for safely removing the steering wheel.
Instructions for mounting the anti-rotation bracket onto the steering column.
Procedures for attaching the spline and ring gear components to the steering column.
Steps to re-mount the tractor steering wheel after component installation.
Detailed instructions for installing the main mechanical drive unit.
Guidance on installing the SmarTrax MD node onto the machine.
Considerations for selecting an appropriate mounting location for the node.
Specific procedures for mounting the SmarTrax MD node assembly.
Instructions for selecting a location and installing the foot switch.
Steps for connecting the node harness to the SmarTrax MD node and other components.
Instructions for installing the chassis cable when no existing power system is present.
Guidance for connecting the system to an existing CAN system power.
To Next Page