Need help?Do you have a question about the FENDT Vario 826 and is the answer not in the manual?
General| Engine Type | 6-cylinder diesel |
|---|---|
| Transmission | Continuously variable transmission (CVT) |
| Engine | 6-cylinder diesel |
| Hydraulic pump flow | 115 l/min (30.4 gpm) |
| Tire Size (Front) | 540/65 R30 |
| Tire Size (Rear) | 650/65 R42 |
| Engine Power | 260 hp |
| Rated engine power | 260 hp (194 kW) |
| Maximum engine power | 195 kW / 265 hp |
Precautions for safe electrical connections, including polarity and cable order.
Steps to ready the machine and workspace before beginning the installation process.
Best practices for installing or operating the SmarTrax MD system for the first time.
Clarifies the assumed operator orientation for following manual instructions.
Guidance on how to access and obtain software and manual updates online.
Detailed list of all components included within the SmarTrax MD installation kit.
Step-by-step instructions for safely removing the steering wheel from the machine.
Procedure for attaching the anti-rotation bracket around the steering column.
Steps for mounting the spline adapter and ring gear onto the steering column.
Guide to re-attaching the steering wheel after component installation.
Instructions for installing the primary mechanical drive unit onto the steering assembly.
Guidelines for choosing a mounting location and securely installing the SmarTrax MD node.
Steps for selecting a location and fixing the foot switch inside the vehicle cab.
Connecting the node harness to the SmarTrax MD node and other system parts.
Instructions for fitting the chassis power cable on machines without existing systems.
Procedure for integrating the SmarTrax MD system with the machine's CAN network.
To Next Page
