Need help?Do you have a question about the FENDT Vario 824 and is the answer not in the manual?
General| Engine Power | 240 hp |
|---|---|
| Rated engine speed | 2100 rpm |
| Hydraulic Pump Flow | 120 L/min |
| Max Speed | 50 km/h |
| Tire Size - Front | 540/65 R30 |
| Tire Size - Rear | 650/65 R42 |
| Engine Type | 6-cylinder diesel |
| Transmission | CVT |
| Hydraulic System | Closed center |
Guidelines for safe electrical connections and procedures during installation.
Pre-installation steps and safety advice for preparing the machine.
Best practices for installing or operating the SmarTrax MD system.
Defines the standard viewing perspective for manual instructions.
Information on where to find software and manual updates.
Lists all components included in the SmarTrax MD installation kit.
Detailed steps and notes for safely removing the tractor's steering wheel.
Instructions for mounting the anti-rotation bracket onto the steering column.
Steps to install the spline adapter and ring gear onto the steering column.
Procedure for reattaching the steering wheel after component installation.
Guidance on installing the main mechanical drive unit.
Instructions for installing the SmarTrax MD node, covering mounting and placement.
Detailed steps for assembling and mounting the node bracket and the node itself.
Guidance on selecting a location and securely installing the foot switch.
Steps for connecting the node harness to the node, foot switch, and operator presence switch.
Procedure for installing the chassis power cable for systems without existing power.
Instructions for integrating SmarTrax MD with the machine's existing CAN system.
To Next Page
