Need help?Do you have a question about the FENDT Vario 927 and is the answer not in the manual?
General| Engine Power | 265 HP |
|---|---|
| Engine Type | 6-cylinder diesel |
| Engine | AGCO Power |
| Rated engine speed | 2100 rpm |
| Displacement | 6.06 L |
| Max Speed | 50 km/h |
| Weight | 10, 500 kg |
| Operating weight | 10, 500 kg |
| Fuel Tank Capacity | 400 L |
| Hydraulic pump output | 120 L/min |
| Hydraulic Pump Flow | 120 L/min |
| Tire Size - Front | 600/70 R30 |
| Tire Size - Rear | 710/70 R42 |
| Max. Speed | 50 km/h |
| Transmission | Vario transmission |
Covers electrical safety precautions during installation and operation of the SmarTrax MD system.
Outlines prerequisites and initial steps for installing the SmarTrax MD system.
Provides best practices for installing or operating the SmarTrax MD system for the first time or season.
Clarifies the assumed orientation for following installation instructions.
Informs users about where to find software and manual updates.
Lists all components included in the SmarTrax MD installation kit.
Details the process for safely removing the tractor's steering wheel.
Guides the installation of the anti-rotation bracket onto the steering column.
Describes how to install the spline and ring gear components onto the steering column.
Explains how to reattach the tractor's steering wheel after component installation.
Covers the steps for installing the main mechanical drive unit.
Provides instructions for mounting and installing the SmarTrax MD node in the cab.
Details the specific mounting procedures for the SmarTrax MD node for different tractor models.
Explains the process of installing the foot switch in the tractor cab.
Guides the connection of the node harness to the SmarTrax MD node and other components.
Outlines the installation of the chassis power cable for systems without existing power connections.
Describes how to integrate SmarTrax MD with a tractor's existing CAN system for power.
To Next Page
