CHAPTER
2
Manual No. 016-5030-043 Rev. A 3
C hapter 2
Introduction
Congratulations on your purchase of the SmarTrax™ MD system!
SmarTrax MD-assisted steering takes the stress out of driving and makes it quick and easy for you to improve
your operating efficiency and performance. SmarTrax MD is compatible with Cruizer II™ and Cruizer II™ RTK,
Envizio Pro™, Envizio Pro®, Envizio Pro XL™, and Viper Pro™ systems.
The following instructions are designed to assist with the proper installation of the SmarTrax MD system. Refer
to the SmarTrax MD Calibration & Operation Manual (P/N 016-5030-020) for assistance with calibrating the
software and using the SmarTrax MD system.
This manual applies to the following machines:
MAKE: Fendt
MODEL: Vario 700 Series - 712, 714, 716, 718, 720, 722, and 724
Vario 800 Series - 818, 820, 822, 824, 826, and 828
Vario 900 Series - 924, 927, 930, 933, 936, and 939
FIGURE 1. Fendt Vario 828
To Next Page
Loading...
