◎Dual tail switch for fast, single-handed operation.
◎Boot-up battery level indication and low-voltage warning.
◎Made of durable A6061-T6 aluminum.
◎Premium type HAIII hard-anodized anti-abrasive finish.
◎Size: 7.42'' x 2.68'' x 1.00''/188.5 × 68 × 25.4 mm.
◎Weight: 8.91 oz/252.7 g (excluding battery).
Operating Instructions
Switches
The round tail switch is the tactical switch for instant activation.
The oval tail switch is the functional switch for output selection and instant strobe.
On/off
Tap the tactical switch to momentarily turn on the light, release it and the light will go out.
Fully press the tactical switch to constantly turn on/off the flashlight.
Output Selection
With the light switched on, single click the functional switch to cycle through
Low→Med→High→Turbo.
With the light switched on, press and hold the functional switch to enter the strobe mode, single
click the functional switch once again to cycle through Strobe→SOS.
Strobe
With the light switched off, press the functional switch to enter the strobe mode, release it and
the light will go out.
With the light switched on, press and hold the functional switch to enter the strobe mode.
Intelligent Memory Circuit
The light memorizes the last selected output excluding strobe and SOS. When turned on again
the previously used output will be recalled.
To Next Page
Loading...
