Fenix E LITE User Manual

FenixE‐LITEFlashlight

TechnicalParameters 
ANSI/PLATO
FL1
High Med Low Red RedFlash Blue BlueFlash

Output
150lumens 45lumens 5lumens 3lumens 3lumens 3lumens 3lumens

Runtime
1hour 
40minutes*
4hours 
20minutes
20hours 8hours 22hours 8hours 22hours

Distance
40meters 22meters 9meters 7meters 7meters 7meters 7meters

Intensity
410
candela
121
candela
20
candela
/ / / /

Impact
Resistance
1meter

Water
Resistant
IP66
Note:Accordingto the ANSI/PLATO FL1 standard,the abovespecifications arefromthe results
producedbyFenixthroughits laboratory testingusingthe built‐in275mAhLi‐polymerbattery,
underthetemperatureof21±3°Candhumidityof50%‐80%.Thetrueperformanceofthisproduct
mayvaryaccordingtodifferentworkingenvironments.

Fenix E LITE Specifications

General

Light Output	150 lumens
Runtime	Up to 20 hours
Water Resistance	IP66
Impact Resistance	1 meter
Operating Modes	Red, Red Flash
Modes	High, Red, Red Flash
Body Material	Plastic
Dimensions	2.01'' x 0.94'' x 0.63'' (51 x 24 x 16 mm)

Summary

Technical Parameters

Product Features

Operating Instruction

On/off

Press and hold the switch for 0.5 seconds to turn the light on or off.

Red and Blue Lights

With the light turned on, press and hold the switch for 1.2 seconds to enter red/blue light modes.

Output Selection

Single click the switch to cycle through brightness levels for white or red/blue lights.

Lock and Unlock

Double click the switch to lock the light to prevent accidental activation.

Charging

Battery Level Indication

Intelligent Overheat Protection

Low-voltage Warning

Usage and Maintenance

Included Accessories

Safety Warnings