Fenix LD02 V2.0 Flashlight
Technical Parameters
ANSI/PLATO FL1 High Med Low UV Light
Output
70 Lumens 25 Lumens 1 Lumen 200mW
Runtime
Alkaline
Battery
40min* 2h 40min 75h 4h
Ni-MH
Battery
45min* 2h 55min 45h 3h
Distance
48m 27m 6m /
Intensity
580cd 185cd 10cd /
Impact
Resistance
1m
Waterproof
IP68, underwater 2m
Note: The abovementioned parameters (lab-tested by Fenix using AAA alkaline and Ni-MH batteries)
may vary between flashlights, batteries and environments.
*The runtime of High output is the accumulated time when time-limited downshift activates.
Cree XQ-E HI LED (90-CRI/ 3000K), with lifespan of 50,000 hours
Fitted with 365nm UV LED
Powered by one AAA battery
Digitally regulated output maintains constant brightness
Reverse polarity protection to protect from improper battery insertion
Tail switch for one-handed activation and output selection
Made of durable high-strength and oxidation-resistance aluminum and stainless steel
Premium type HAIII hard-anodized anti-abrasive finish
Optimal quality optical lens
Operating Instruction
ON/OFF ①
Fully press the tail switch to turn on/off the light.
Output Selection
With the light switched on, tap the tail switch to cycle through Low→Med→High→UV.
Battery Specifications
To Next Page
Need help?
General
