Fenix LD22 User Manual

Fenix LD22 Flashlight
The Fenix Model LD22 provides reliable illumination in a wide variety of applications. With
four brightness levels and two flashing modes, LD22 employs a side mode switch for quick
changes. Powered by readily-available AA batteries, this compact flashlight showcases the
durability and power management for which Fenix is recognized around the world.
Technical Parameters
General Mode
ANSI/FSC
Turbo Low Mid High
Strobe SOS
OUTPUT
190
LUMENS
3
LUMENS
42
LUMENS
92
LUMENS
190
LUMENS
92
LUMENS
RUNTIME
2h 26min 110h 15h 5h 59min
DISTANCE
100m
INTENSITY
2521cd
IMPACT
RESISTANT
1m
WATERPROOF
IPX-8᧨underwater 2m
ACCESSORIES
Holster, body clip, lanyard and spare o-ring
Ⴟ Cree XP-G (R5) LED with a lifespan of 50,000 hours
Ⴟ Uses two 1.5V AA (Ni-MH, Alkaline ) batteries
Ⴟ 156mm (Length) x 21.5mm (Diameter)
Ⴟ 60-gram weight (excluding batteries and body clip)
Ⴟ Digitally regulated output maintains constant brightness
Ⴟ Reverse polarity protection guards against improper battery installation
Ⴟ Anti-roll, slip-resistant body design

Fenix LD22 Specifications

General

Product color	Black
Flashlight type	Hand flashlight
Housing material	Aluminum
Waterproof	Yes
International Protection (IP) code	IPX8
Lamp type	LED
Bulb power	- W
Luminous flux	215 lm
Lamps quantity	- lamp(s)
Service life of lamp	50000 h
Number of power levels	6
Light beam distance (max)	113 m
Battery type	AA
Battery life (max)	150 h
Number of batteries supported	2
Quantity	1

Weight and Dimensions

Depth	156 mm
Width	21.5 mm
Weight	60 g

Summary

Technical Parameters

Operation Instruction

Turning on/off

Instructions for activating and deactivating the flashlight using the tail cap switch.

Mode selection

Guide to selecting different lighting modes and brightness levels via the side switch.

Battery Specifications

Battery Replacement

Usage and Maintenance

Product Warranty

Warranty Card Registration

Warning