The Fenix E-CP Flashlight is a versatile device that functions as both a high-performance flashlight and a power bank. It is designed for durability and ease of use, offering multiple output modes and intelligent features for optimal performance and safety.
Function Description
The Fenix E-CP serves primarily as a flashlight with various brightness levels, ranging from a low "Eco" mode to a powerful "Turbo" mode, and also includes a "Strobe" function for signaling or self-defense. Its secondary, but equally important, function is that of a power bank, allowing users to charge other digital devices. This dual functionality makes it a practical tool for outdoor activities, emergencies, or everyday use. The flashlight features an electronic lockout function to prevent accidental activation, and an intelligent memory circuit that recalls the last used output mode (excluding Strobe). It also incorporates intelligent overheat protection to prevent damage from prolonged use at high outputs and a low-voltage warning to remind users to recharge the battery.
Important Technical Specifications
- Output and Beam Distance:
- Turbo: 1600 lumens, 222 meters
- High: 350 lumens, 105 meters
- Med: 150 lumens, 69 meters
- Low: 30 lumens, 33 meters
- Eco: 3 lumens, 10 meters
- Strobe: 1600 lumens
- Runtime:
- Turbo: 2 hours 30 minutes (including output at reduced levels due to temperature or protection mechanism)
- High: 8 hours
- Med: 20 hours
- Low: 84 hours
- Eco: 504 hours
- Intensity:
- Turbo: 12400 candela
- High: 2750 candela
- Med: 1200 candela
- Low: 270 candela
- Eco: 25 candela
- LED: Luminus LED with a lifespan of 50,000 hours.
- Battery: Built-in 5000 mAh rechargeable battery.
- Charging/Discharging:
- USB Type-C port for charging and discharging.
- USB-A port for discharging ONLY.
- Supports 5V/2.4A, 9V/2A, 12V/1.5A fast charging and discharging (18W).
- Normal charging time: approximately 2 hours (with 18W or higher-power fast charging adapter), approximately 3.5 hours (with 5V/2A adapter).
- Dimensions: 5.43" x 1.10" / 138 x 28 mm.
- Weight: 6.00 oz / 170 g (including battery).
- Material: Durable A6061-T6 aluminum with premium type HAIII hard-anodized anti-abrasive finish.
- Impact Resistance: 1 meter.
- Submersible: IP68 rated.
Usage Features
- On/Off: Press and hold the side switch for 0.5 seconds (when unlocked).
- Instant Strobe: Press and hold the side switch for 1.2 seconds (when unlocked); single click to return to previous General mode output.
- Output Selection: Single click the side switch in General mode to cycle through Eco→Low→Med→High→Turbo.
- Lock/Unlock:
- Lock: Double click the switch within 0.5 seconds when off and unlocked; light blinks twice on Low.
- Unlock: Double click the switch within 0.5 seconds when locked; light activates on Eco. Charging the flashlight also unlocks it.
- In locked status, clicking or pressing the switch activates two one-second blinks on Low.
- Power Bank Function:
- Switch off the light and open the anti-dust cap.
- Plug a USB-A charging cable into the light's USB-A port and connect to the device to be charged.
- Alternatively, use the USB Type-C port for discharging with a suitable USB Type-C cable.
- Indicators recede from right to left to display discharge status.
- Only Eco, Low, and Med modes are available when discharging.
- Battery Level Indication: Single click the side switch when off to check battery status for 5 seconds:
- Four lights on: 80% - 100%
- Three lights on: 60% - 80%
- Two lights on: 40% - 60%
- One light on: 20% - 40%
- One light flashes: less than 20%
- Indicators constantly show battery status during charging or power bank use, and intermittently during flashlight use.
- Intelligent Overheat Protection: Automatically steps down output when temperature reaches 50°C or above, allowing reselection of High or Turbo once temperature drops below 50°C.
- Low-voltage Warning: Downshifts to lower brightness levels until Eco output is reached; blinks 3 times every 5 minutes in Eco mode to indicate low battery.
Maintenance Features
- General Care: Keep the anti-dust cover closed after charging or power bank use to maintain dustproof and waterproof ability.
- Battery Maintenance:
- Timely charge the light when battery power is too low to ensure normal battery life.
- Recharge a stored light every four months to maintain optimum battery performance.
- Troubleshooting (Flickering, Intermittent Shine, or Failure to Illuminate):
- Poor battery level: Recharge the light.
- Light is locked: Double click the switch to unlock.
- Warnings:
- Do not disassemble the sealed head, as this can cause damage and void the warranty.
- Lock the light to prevent accidental activation during storage or transportation.
- Do not shine the light directly into eyes or at flammable objects at close range.
- Do not use the light in inappropriate ways (e.g., biting in the mouth).
- The LED is not replaceable; the entire light should be replaced when the LED reaches the end of its life.
- Do not expose the power bank to rain, snow, fire, or excessive temperatures (above 100°C/212°F).
- Do not use damaged or modified power banks.
- Do not disassemble the power bank; refer to qualified service personnel for repairs.
- Use only recommended power supplies/chargers.
- Do not use the power bank in excess of its output rating.
- Have servicing performed by a qualified repair person using identical replacement parts.
- Switch off the power bank when not in use.