Fenix PD40R User Manual

Fenix PD40R Flashlight
Technical Parameters
ANSI/PLATO
FL1
General Mode Flash Mode
Turbo High Med Low Eco Strobe SOS
Output
3,000
Lumens
1,000
Lumens
350
Lumens
100
Lumens
20
Lumens
1,000
Lumens
350
Lumens
Runtime
12min* 2h
7h
25min
21h
15min
55h / /
Distance
200m 123m 68m 39m 16m / /
Intensity
10,000cd 3,800cd 1,150cd 380cd 65cd / /
Impact Resistance
1m
Waterproof
IPX-8, underwater 2m
Spot Beam Angle 23°
Spill Beam Angle 65°
Accessories Lanyard, 3.6V/4500mAh power battery, spare O-ring, holster, USB charging cable
The abovementioned parameters (lab-tested by Fenix using a 3.6V/4500mAh 26650 rechargeable
Li-ion power battery) may vary between flashlights, batteries and environments.
*Due to the dual overheat protection; the runtime of Turbo is estimated.
 Uses Cree XHP 70 LED with a lifespan of 50,000 hours
 Powered by one 26650 rechargeable Li-ion power battery and 26650 rechargeable Li-ion
battery
 138.5mm Length x 34mm Head diameter x 30mm Body diameter
 126 grams (excluding battery)
 Micro USB charging

Fenix PD40R Specifications

General

Max Lumens	3000
Beam Distance	405 meters
Water Resistance	IP68
Beam Intensity	41000 cd
LED	Luminus SST70 LED
Impact Resistance	1 meter
Strobe	Yes
Material	A6061-T6 aluminum
Surface Treatment	Premium type HAIII hard-anodized anti-abrasive finish
Charging Port	USB Type-C
Battery Type	21700
Length	138 mm
Max Runtime	88 hours
Head Diameter	34 mm
Body Diameter	25.4 mm
Modes	Eco, Low, Mid, High, Turbo
Lens	Toughened ultra-clear glass lens with anti-reflective coating
Reflector	Smooth
Operating Temperature	-35°C to 45°C
Warranty	Limited Lifetime Guarantee