Battery Replacement
Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then
screw the tail cap back on.
Usage and Maintenance
Disassembling the sealed head can cause damage to the light and will void the warranty.
Fenix recommends using excellent quality battery. If the light will not be used for an
extended period, remove the battery, or the light could be damaged by electrolyte leakage
or battery explosion.
Long-term use can result in O-ring wear. To maintain a proper watertight seal, replace the
ring with an approved spare．
Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: The battery needs replacing.
Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s
specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please refer to the warranty policy before contacting your
authorized distributor.
Warning
The flashlight is a high-intensity lighting device capable of causing eye damage to the user or
others. Avoid shining the flashlight directly into anyone’s eyes.
To Previous Page
Loading...
